top of page

グループ

公開·23名のメンバー

Samsung Clone J2 Prime Flash File MT6572 6.1 Hang Logo Lcd Fix Firmware


Samsung Clone J2 Prime Flash File MT6572 6.1 Hang Logo Lcd Fix Firmware




If you have a Samsung Clone J2 Prime MT6572 6.1 smartphone that is stuck on the boot logo or has a broken LCD screen, you may need to flash a new firmware to fix the problem. Flashing a firmware is a process of installing a new software on your device, which can erase all your data and settings. Therefore, you should backup your important files before proceeding.




Samsung Clone J2 Prime Flash File MT6572 6.1 Hang Logo Lcd Fix Firmware


Download: https://www.google.com/url?q=https%3A%2F%2Ft.co%2FcmTF2TfEWF&sa=D&sntz=1&usg=AOvVaw3DPXDnur0-5t7iFuOqWTbV



In this article, we will show you how to flash the Samsung Clone J2 Prime Flash File MT6572 6.1 Hang Logo Lcd Fix Firmware using a tool called SP Flash Tool. This firmware is compatible with the Samsung Clone J2 Prime MT6572 6.1 device, which has a MediaTek MT6572 chipset and runs on Android 6.1 Marshmallow operating system.


Requirements





  • A Windows PC or laptop.



  • A USB cable to connect your device to the PC.



  • A Samsung Clone J2 Prime MT6572 6.1 device with at least 50% battery charge.



  • The Samsung Clone J2 Prime Flash File MT6572 6.1 Hang Logo Lcd Fix Firmware file, which you can download from [here].



  • The SP Flash Tool, which you can download from [here].



  • The MediaTek USB VCOM drivers, which you can download from [here].




Steps





  • Extract the Samsung Clone J2 Prime Flash File MT6572 6.1 Hang Logo Lcd Fix Firmware file and the SP Flash Tool file to your PC.



  • Install the MediaTek USB VCOM drivers on your PC.



  • Launch the SP Flash Tool and click on the "Download" tab.



  • Click on the "Scatter-loading" button and browse to the folder where you extracted the firmware file. Select the "MT6572_Android_scatter.txt" file and click "Open".



  • Make sure that all the boxes are checked and click on the "Download" button.



  • Turn off your device and remove the battery (if possible).



  • Connect your device to the PC using the USB cable. The SP Flash Tool will detect your device and start flashing the firmware.



  • Wait for the process to complete. You will see a green tick mark when it is done.



  • Disconnect your device from the PC and insert the battery (if removed).



  • Turn on your device and wait for it to boot up. It may take some time for the first boot, so be patient.




Congratulations! You have successfully flashed the Samsung Clone J2 Prime Flash File MT6572 6.1 Hang Logo Lcd Fix Firmware on your device. You can now enjoy a smooth and stable performance on your device.


If you have any questions or problems, feel free to leave a comment below or contact us through our website.




グループについて

グループへようこそ!他のメンバーと交流したり、最新情報をチェックしたり、動画をシェアすることもできます。

メンバー

グループページ: Groups_SingleGroup
bottom of page